Categories
Contact Us
Zhejiang Shengda Machinery Co.,Ltd
Service Hotline
+86-579-85861908

News

Home > NewsContent

Common Problems Of Jaw Crusher Jaw Plate

Zhejiang Shengda Machinery Co.,Ltd | Updated: Sep 28, 2017

Jaw crusher jaw plate referred to as jaw plate, jaw plate fixed jaw plate and movable jaw plate, jaw crusher wear parts. In the jaw crusher running state, moving jaw attached to the movable jaw plate to do complex pendulum movement, and the fixed jaw plate to form an angle squeeze stone. Therefore, the Jaw Crusher Jaw Plate is more easily damaged in the jaw crusher. What is the problem with jaw crusher jaws in operation?

1, jaw crusher jaw and machine surface contact is not smooth: the new jaw plate must be fixed tight, the installation must be smooth and the surface of the machine contact. A good plastic material can be padded between the jaw plate and the surface of the machine.

 Second, the nature of broken material has changed, but the jaw crusher did not make timely adjustments: each batch of materials into the crusher should be sampling, in the event of material properties have a greater change, we must promptly change the crusher Of the parameters, so that with the incoming material to match; jaw plate must use high hardness, wear resistance, strong resistance to the material.

Third, the jaw crusher eccentric shaft speed too fast, has been broken over the material too late to rule out, resulting in crushing chamber blockage, jaw plate wear. The worn jaws can be repaired by surfacing.

Above for jaw crusher jaw plate the most common problem, when the problem can be dealt with in a timely manner, so as soon as possible into the work.